Several Longboarding Techniques That You Need to Know

Skateboards have been popular since the 1950s and were initially designed to mimic concrete and asphalt surfaces. Longboards are skateboards that are wider and longer than a regular skateboard. Longboards’ lengths vary slightly, and there are no size rules that distinguish longboards from regular skateboards. Commonly, a longboard is a board that measures 100 inches or more. Longboards are more extensive than regular skateboards, usually sturdier, more expensive, and much more comfortable to ride.

How to longboard uphill is a riding style that the only expert can perform. Because of the additional weight and size, longboards are not suitable for typical skateboarding tricks. Nevertheless, many techniques can be done with longboards. This technique is mainly used in downhill races to reduce speed in an otherwise tight turn. The following are several longboarding techniques that you need to know.



Drifting occurs when longboards drop traction mid-turn. This method is most generally practiced in downhill competition to lessen the pace around a twist that is oppositely too close to do.

Foot Braking

Foot braking occurs when one foot is placed on the road or sidewalk while balancing on the board with the other foot. It is an effective way to reduce speed, but it is not an effective braking method. This only works at high speeds.

Air Braking


Air braking applies when players stand straightforward on their longboards, outstretching their arms. This way enables the boarder to get wind revolution, enabling them to reduce down slowly. It’s a useful approach to diminish speed, but it is not an efficient braking method. This method also only goes at high velocities.


Carving is frequently practiced in downhill longboarding when driving at high speeds. The player moves his board in a set of winding S-shaped hooks, bending right and then left, slowly decreasing the pace as he heads downhill. This way is a useful means of managing rate or slowing down.


When a rider walks on water, they move their feet up and down along the deck. In general, longboarders use this method on more longboards than shorter boards. Some boarders incorporate complicated movements such as spins, pirouettes, or jumps into the technique to add more dynamics.

Slide Braking


Downhill longboarders typically apply slide braking. The longboarder quickly changes the board into a slide and ultimately makes it to a full stop. A sliding brake can be performed from the front or back and, with a little work, can be applied to achieve a complete stop immediately. Occasionally, a rider will put their hands on the ground for added balance and traction while making this movement.

Leave a Reply

Your email address will not be published. Required fields are marked *